R22 Replacement, 7.5 Lb., R453a Refrigerant, Newest R22 Drop-in Replacement (2024)


(1) 7.5 Lb. of R453a Refrigerant in a DOT39 disposable container.

R453a is the newest R22 drop-in replacement refrigerant in the U.S. market.


R453a has been sold worldwide for the past5 years.


It is the closest replacement to R22that operates with very similar discharge pressure, cooling capacity and flow rate as R22.


It requires no oil or system component changes and has the lowest GWP of any HFC R22 replacement in the market at 1664 TAR.


R453a is a PROVEN R-22 replacement now being manufactured in the United States.


R453a Advantages:



  • R453a has the same flow rate as R22.

  • R453a operates at a similar discharge pressure as R22 and lower pressure than R407A & C, R422B & D, R417a and R427A.

  • R453a has the benefit of lower energy consumption;

  • R453a operates at near cooling capacity of R22 in both A/C and Refrigeration applications down to -20⁰F evap. temp

  • R453a is the lowest GWP HFC R22 replacement on the market at 1664 TAR and is Zero Ozone Depleting.

  • If a service technician inadvertentlymixes R453a with R22therewill be no harm to the system components or system efficiency.

  • We know this to be true because in Europe, where thereare no regulations against mixing refrigerants, our European sister company has tracked these developments.

  • In the USA,the EPA does not permit or condone the intentional mixing of refrigerants.

  • R453a is good for cap tube and TXV systems.

  • It has been operating in all types of systems with all types of compressors worldwide since 2013.

  • R453a requires no oil or system component changes.


Type and Description

R453a is a non flammable HFC blend.

It is compatible with both traditional mineral and synthetic lubricants so that a retrofit to a different refrigerant oil is not required.

The small amount of hydrocarbons in R453a improve the oil return to the compressor to extend the life of the compressor.

R453a is a direct replacement for R22, providing an easy and long term solution.

Because there is no need to use expensive and hygroscopic synthetic lubricants (POE), the risk of moisture ingress into a refrigeration system is completely avoided.

R453a has similar discharge pressures as R22 and lower discharge temperature than R22; which make R453a a seamless drop-in replacement.

R453a is suitable for use as a replacement for R-22 in existing residential, commercial and industrial air conditioning and refrigeration systems.

Service Work

Because it is a blend, it is recommended that R453a be charged into systems as a liquid as opposed to the gaseous phase. Since there is no need to change the existing lubricant, R453a is straightforward to use, as the published conversion procedure outlines.

Lubricants

R453a is compatible with mineral, alkybenzene and polyolester (POE and PAO) lubricants.

Therefore, there is no need to change the lubricant although compressor manufacturers' recommendations regarding lubricity should be followed.

Materials Compatibility

R453a is compatible with all materials commonly used in refrigeration systems previously charged with R22.

In general, materials which are compatible with R22 can be used with R453a.

lt is recommended to check equipment manufacturer's retrofit literature and obtain recommendations from equipment manufacturers with regard to materials' compatibility.

Environmental Data

None of the components of R453a contains chlorine so that it has no ability to deplete the ozone layer.

As with all hydrofluorocarbons (HFCs), R453ab does have a direct global warming potential (GWP), but this is counterbalanced by its lower Total Equivalent Warming Impact (TEWI).

Tests have shown that R453a has a higher Coefficient of Performance (COP) than R22 in a range of applications including commercial refrigeration systems and heat pumps, both in the heating and cooling mode.

R453a operates at near cooling capacity of R22 in both A/C and Refrigeration applications














CANADA CUSTOMERS:

We will include a copy of the eBay invoice with this item as UPS in Canada requires this.

You will have to pay your custom charges and all other charges that apply in Canada.

We have no way of knowing what those charges are or will be.

You can contact your local UPS store with questions on your costs for custom charges.










The charges will apply to the actual cost of goods and does not include shipping costs in the declared value.




If you purchase this item from Canada and refuse delivery from UPS due to your local custom charges, you will be charged a return shipping cost as well as the actual original shipping cost.


FOR USE BY QUALIFIED TECHNICIANS WITHAPPROPRIATEMANUALS.


USE ONLY IN AIR CONDITIONING SYSTEMS DESIGNED FOR R22.


Refrigerant Can Notes:


INTENDED FOR USE BY QUALIFIED, EPA CERTIFIED TECHNICIANS,WHO ARE TRAINED IN THE USE OF REFRIGERANT AND

REFRIGERANT HANDLING.


**WARNING**

*ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS.

*ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS.

*CONTENT UNDER PRESSURE.

*VAPOR HARMFUL SKIN AND EYE IRRITANT.

DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO

BURST AND RESULT IN SERIOUS INJURY.

ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT.

USE ONLY IN SYSTEMS DESIGNED FORREFRIGERANT R22.

FORLOW PRESSURE SIDEOF THE SYSTEM ONLY!!!!

DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F.

HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST.

DO NOT PUNCTURE OR INCINERATE THIS CAN.

DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F.

Do not refill can.

KEEP OUT OF REACH OF CHILDREN.







PLEASE CONTACT YOUR LOCAL UPS CENTER AND ASK THEM WHAT YOUR












R22 Replacement, 7.5 Lb., R453a Refrigerant, Newest R22 Drop-in Replacement (2024)

FAQs

What is a good drop in replacement for R-22? ›

Freon MO99 is the gold standard for R-22 alternatives and was developed by the same scientists who engineered Freon R-22. The benefits of Freon MO99 include: Capacity — The ability of Freon MO99 to heat or cool a given space is closer to Freon R-22 than any other refrigerant on the market.

What is the approved drop in service replacement for R-22? ›

Final answer: Of the provided options, R-407C is the approved 'drop-in' replacement for R-22, commonly used in air conditioning systems.

What is the new refrigerant to replace R-22? ›

Freon™ MO29 (R-422D) refrigerant is a low-toxicity, non-ozone depleting hydrofluorocarbon (HFC) replacement for R-22.

Is R453A compatible with R-22? ›

R453A (RS-70) is a non-flammable blend which has an Ozone Depleting Potential (ODP) of 0 and is compatible with both traditional and synthetic lubricants. It is a suitable replacement for R22 in both refrigeration and air- conditioning applications at low and high temperatures.

What is the best alternative refrigerant for R-22? ›

This can ultimately result in lower running costs than you are used to with your existing R22 system, helping to offset the cost of upgrading your equipment. One of the most popular refrigerants for these kind of system replacements is R-410A which is the preferred choice of industry-leading manufacturer Daikin.

What refrigerant can I use to top off R-22? ›

Freon™ MO99 can be used to retrofit R-22 heat pumps . Based on system testing, similar efficiency and slightly lower capacity can be expected. A slightly lower capacity may force the compressor run time to increase.

How much does it cost to replace R-22 drop in? ›

Regular Price: $300.00

NU-22B® Replaces R-22, R-407C, R-422D and R-417A. NU-22B is the only R-22 replacement you need.

Can you put r438a on top of R-22? ›

R-438A is a non-ozone depleting hydrofluorocarbon (HFC) refrigerant blend which can be used to retrofit existing hydrochlorofluorocarbon (HCFC) refrigerant R-22 refrigeration and air conditioning systems with direct expansion evaporators and positive displacement compressors.

Is R422B a drop-in replacement for R-22? ›

No. There is no such thing as a “drop in” replacement for R-22. Mixing refrigerants is not recommended. R-22 replacements should not be used to top off R-22 systems.

What is the most common replacement for R22? ›

What's a safer alternative to R22? All air conditioners and cooling equipment currently being manufactured use hydro-fluorocarbon (HFC) refrigerants. R410A is the most common, but others include R134a, R407C and R407A.

Is r458a a replacement for R22? ›

TdX 20 (R-458A) is the only R-22 Replacement that is more energy efficient than R-22 and therefore creates a return on investment.

Is R438A a replacement for R22? ›

Since fluorochemical refrigerants were introduced to the market more than 85 years ago, the Freon™ brand has been developing and evolving the chemistry behind them. Among those products is Freon™ MO99™ (R-438A), a retrofit refrigerant for R-22 that does not require an oil change.

What is the best drop-in for R-22? ›

RS-44b is the lowest GWP HFC R22 replacement on the market at 1664 TAR and is Zero Ozone Depleting.

Can you mix R-22 with replacement R-22? ›

Mixing refrigerants is always a no-no.

Can you top off R-22 with rs44b? ›

The Environmental Protection Agency (EPA) in the United States does not permit the mixing of different refrigerants. However, it is known from experience in Europe that the unintended mixing of RS-44b with R22 will not generate higher pressure readings, loss of efficiency or component damage.

Can I replace R-22 with R-410A? ›

You cannot just switch refrigerants because R410-A and R-22 have different chemical properties. R410-A operates at a higher pressure. If you put R410-A into an R-22 system, the parts will rupture due to the increased force. You can convert your current system to one that runs on R-410A, but the cost will be high.

Can you use 407C in place of R-22? ›

Features and Benefits. Freon™ 407C has been a popular R-22 replacement because of its properties, which include: Similar cooling capacity, energy efficiency, and pressures as R-22 in systems. An ability to be topped off after a leak, multiple times, with minimal impact on system performance.

What is the lowest GWP R-22 replacement? ›

RS-44b is the lowest GWP HFC R22 replacement on the market at 1664 TAR and is Zero Ozone Depleting. If a service technician inadvertantly mixes RS-44b with R22 there will be no harm to the system components or system efficiency.

Is 427A a replacement for R-22? ›

* Forane® 427A is intended as a retrofit in systems originally designed for R-22. Therefore, how the system was running on R-22 will be a guide or target for how the system should run on R-427A. Compared to R-22, expect 0-5 psi lower on the suction side and 0-10 psi higher on the discharge.

References

Top Articles
Latest Posts
Article information

Author: Nicola Considine CPA

Last Updated:

Views: 5643

Rating: 4.9 / 5 (49 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Nicola Considine CPA

Birthday: 1993-02-26

Address: 3809 Clinton Inlet, East Aleisha, UT 46318-2392

Phone: +2681424145499

Job: Government Technician

Hobby: Calligraphy, Lego building, Worldbuilding, Shooting, Bird watching, Shopping, Cooking

Introduction: My name is Nicola Considine CPA, I am a determined, witty, powerful, brainy, open, smiling, proud person who loves writing and wants to share my knowledge and understanding with you.